3 replies [Last post]
wheeler7664
wheeler7664's picture
Offline
VBMWMO #7664
Joined: 12/27/2009
Posts: 13

Greetings,
Yesterday I brought home my first vintage beemer, a 1964 R27.
Am very happy - what a fine little machine!

Had to bring the bike home over a two day period in a U-haul trailer.
Discovered this morning that the trailer bouncing had caused a small amount of battery acid to come out the battery over flow tube, where it was deposited on the top rear engine case.

I've cleaned off the white residue, but there is still a discoloration about .5 inch by 2 inches at the rear of the case.
Of course, I'm also going to get a longer overflow tube to go back behind the engine.

Queries:
Is there anything else I can or should do about this discoloration on the otherwise generally pristine case?
Should I have any concern about remaining acidic material eating away at the aluminum?

Thanks in advance for help and advice.

Bruce Frey
Bruce Frey's picture
Offline
VBMWMO #6316
Houston, TX USA
Joined: 10/27/2006
Posts: 455
I would suggest that you wash

I would suggest that you wash the area with baking soda to make certain the acid is neurtalized. My next move would be to rub the area with a green Scotchbrite pad and maybe a SS brush. If that doesnt work, I would try one of the cleaners for cast aluminum wheels with a tooth brush. Be sure to rinse well and do not let it sit too long or you may have the same issue.

Hopefully you can just work on the the affected area without having to do the entire case

Let us know hw it goes.

Bruce

wheeler7664
wheeler7664's picture
Offline
VBMWMO #7664
Joined: 12/27/2009
Posts: 13
Thanks very much for the kind

Thanks very much for the kind reply.
I used the baking soda and scotch-brite pad, which together made the spot scarcely noticeable.
Much appreciated!

rebbet
rebbet's picture
Offline
Joined: 03/03/2010
Posts: 3
I need a BMW bike

Bruce Frey wrote:

I would suggest that you wash the area with baking soda to make certain the acid is neurtalized. My next move would be to rub the area with a green Scotchbrite pad and maybe a SS brush. If that doesnt work,JN0-303 I would try one of the cleaners for cast aluminum wheels with a tooth brush. Be sure to rinse well and do not let it sit too long or you may have the same issue.

Hopefully you can just work on the the affected area without having to do the entire case

Let us know hw it goes.

Bruce

I really like BMW bike.

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.