• Post reply
2 replies [Last post]
Fri, 05/13/2011 - 17:04
rbeebe0627
rbeebe0627's picture
 Offline
VBMWMO #7913
Joined: 02/25/2011
Posts: 10

Hello,just getting ready to install throwout brg assy and read I need to coat everything including push rod felt with NBU 30 PTM grease.I have honda 60 and sig 3000 on hand.Can I use one of these or another product that would be easier to find. Thanks

Top
  • 463 reads
  • Quote
Fri, 05/13/2011 - 17:28
#1
schrader7032
schrader7032's picture
 Offline
VBMWMO #7032
San Antonio, TX
Joined: 10/27/2006
Posts: 3475
I just redid my /7 clutch and

I just redid my /7 clutch and actuation parts. I just coated them with gear oil and put it together...well not the clutch but the bearing and felt! Once running, oil splash from the gears with continue to lubricate the parts. Not sure why anything special has to be used...it'll just get washed with gear oil soon enough anyway...

__________________

Kurt in S.A.
'78 R100/7 '69 R69S '52 R25/2

Top
  • reply
  • quote
Fri, 05/13/2011 - 23:13
#2
rbeebe0627
rbeebe0627's picture
 Offline
VBMWMO #7913
Joined: 02/25/2011
Posts: 10
R9 throwout brg

Thanks for responding Kurt.Just put a new clutch in the 90,Clymer manual states to use the grease.I was surprised to read that thought gear oil would be ok.Put it all back together when noticed the rubber push rod cup was ripped.So mch for my inspection skills.Got a big itch to ride so I think I will follow youe advice thanks again. Take care.

Top
  • reply
  • quote

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.